turning Off the Manufacturing Mode for the System Board
Your replacement system board is shipped with the manufacturing mode turned on. After thesystem board is installed, you must turn off the manufacturing mode for your system to operatecorrectly. If the manufacturing mode is enabled, the system may not boot correctly. In addition,changes to BIOS and CMOS settings will not be retained, and you will not be able to flash update the BIOS.To turn off the manufacturing mode, perform the following steps:
Turn on or restart your system.
Press <F2> immediately after you see the following message:
<F2> = System Setup
From the main System Setup screen, press <Alt><F> to turn off the manufacturing mode.
Review the various System Setup options and change them as necessary to your preferred
system configuration.
For details on the various options, see "Using the System Setup Program" in your User’s
Guide.
Press <Esc> to exit the System Setup program.
Save the changes you have made and exit the program when prompted to do so.
As the system reboots, verify that the manufacturing mode is disabled.If the manufacturing mode is still turned on, the following message appears at the top of the screen:Manufacturing Mode is Detected If this message appears, repeat steps 1 through 5 to disable the manufacturing mode and restore the System Setup options.
